Sales Message Goes Here

Tempi di spedizione :: Informativa Privacy :: Alcuni degli ultimi lavori

Information

Home :: :: :: New 40 Leds Day&Night Dome Color 1/3"Sony Chip CCD Camera

Product 8/9

larger image

New 40 Leds Day&Night Dome Color 1/3"Sony Chip CCD Camera

105.00EUR

New 40 Leds Day&Night Dome Color 1/3"Sony Chip CCD Camera(2921010001499)

Major parameters Specification

Camera:

Image Sensor:

1/3" Sony Clip CCD

LEDs:

40PCS

Infrared Wavelength:

850mm

Infrared Lamps Irradiation Kistan:

Night/Day ON/Off

Horizontal Resolution:

420TVL

Picture Elements:

PLA:500(H)x582(v) NTSC:510(H)x492(v)

System of signal:

PAL/NTSC

Sync System:

Internal Synchronization

Mini. Illumination:

0 Lux (infared lamps are on)

S/N Ratio:

More than 48dB

Gamma Characteristics:

0.45

Electronic shutter:

1/50(1/60) -1/100,000 Second

Video Output:

1.0Vp-p750hms. Negative

Power Consumption:

12VDC 120mA(when the infrared lamps are turned on maximum electricity in 400mA)

Color:

Black

Status:

Under 10Lux by CDS

Caution:

1.Don't attempt to disassemble the camera .inorder to prevent electric shock ,do not remove screws or cover .There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.

2.Handle the camera with care: The Camera could be damaged by improper handing or storage .

3.Do not expose the camera to rain or moisture ,or try to operate it in wet areas.
Take immediate action if the camera becomes wet, Turn the power off and rdfer serving to qualified service personnel.Moisture can damage the camera and also create a danger of electric shock.

4.Do not use strong or abrasive detergents when cleaning the camera body.Use a dry cloth to clean the camera when dirty ,Incase the dirty is hard to remove. Use a mind detergent and wipe gently.

5.Never point the camera toward the sun.Whether the camera is used outdoors or not, never point it toward the sun .Use caution when operating the camera in the vicinity fo spot lights or other bright lights and lights reflecting objects.

6.Do'nt operate the camera beyond its temperature, humidity or power source ratings.
Don't use the camera in an extreme environment where high temperature or high humidity exists. Use the camera under conditions where temperatures are between 14~22F (-10~+50),and humidity is below 85%.For the correct power supply, refer to the specification sheet.

Add to Cart: